Conjugate Mirror by a Panda Ring Circuit

Preecha P. Yupapin; Somboon Nimcome

doi:doi:10.11648/j.si.20130101.11

| Peer-Reviewed

Conjugate Mirror by a Panda Ring Circuit

Preecha P. Yupapin, Somboon Nimcome

Published in Science Innovation (Volume 1, Issue 1)

Published: 20 February 2013

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

This paper presents the use of a nonlinear microring resonator device known as a modified add-drop filter for small scale conjugate mirror, which is a basic device for 3D image construction and reconstruction system. It can also be useful for real time 3D image display applications. By using the modified add-drop filter, the 3D image can be constructed and reconstructed within the microring circuit. In this circuit, the object and reference beams can be formed by the reflected signals from through and drop ports of the add-drop filter respectively, where the conjugate mirror concept is obtained by the nonlinear coupling effects via the two nonlinear side rings, in which the four-wave mixing of those signals can be introduced. Finally, the interference of those two beams can be constructed and seen by the whispering gallery mode at the center ring, while the interference signals can be seen by the add port output. The WGMs of waves are simulated and discussed, where the 3D image construction and reconstruction can be seen by using the microring circuit as the conjugate mirror, in which the use of large volume display using a new type of conjugate mirror can be realized.

Published in	Science Innovation (Volume 1, Issue 1)
DOI	10.11648/j.si.20130101.11
Page(s)	1-4
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2013. Published by Science Publishing Group

Keywords

Conjugate Mirror, 3D Display, 3D Image, Holography, Wgms

References

[1]	V. Shkunov and B. Zel'dovich, "Phase conjugation", Scientific American, 253 (1985), 54-59.
[2]	D. M. Pepper, "Applications of optical phase conjugation", Scientific American, 254 (1986), 74-83.
[3]	D. Hounam, A SAR conjugate mirror, IEEE Geoscience and Remote Sensing Letters, 3(3), (2006), 373-376.
[4]	E.J. Bochove, Theory of a variable aperture phase conjugate mirror with application to an optical cavity, J. Applied Physics, 59(10), (1986), 3360-3362.
[5]	P.P. Yupapin, "Nonlinear coupling effects of waves in a PANDA ring," Discovery Science, 1(1), 2013.
[6]	J.C. Knight, N. Dubreuil, V. Sundoghdar, J. Hare, V. Lefe-vre-Seguin, J.M. Raimond and S. Haroche, "Characterizing whispering-gallery modes in microspheres by direct obser-vation of the optical standing-wave pattern in the near field", Optics Letters, 21(10)(1996)698-670.
[7]	N. Thammawongsa, S. Tunsiri, M.A. Jalil, J. Ali and P.P. Yupapin, "Storing and harvesting atoms/molecules On-Chip: Challenges and applications", J. Biosensors & Bioelectronics, 3(5)(2012) e114-115.
[8]	N. Sarpat, W. Khunnam, S. Chiangag, N. Thammawongsa, M.A. Jalil, J. Ali and P.P. Yupapin, Fast, Slow, Stopping and Storing Light Simultaneously using a PANDA Ring On-Chip," Asia Pacific Physics Newsletter, 2(1) 2013.
[9]	K.S. Yee, "Numerical solution of initial boundary value problems involving Maxwell's equations in isotropic media", IEEE Transaction on Antennas Propagation, 14, (1996)302-307 (1966).
[10]	E. Waks, V. Jelena, "Coupled mode theory for photonic crystal cavity-waveguide interaction", Optics Express, 13(13)(2005) 5064-5073.
[11]	N. Thammawongsa, N. Moonfangklang, S. Mitatha, P.P. Yupapin, "Novel nano-antenna system design using photonics spin in a panda ring resonator", PIER L, 31(2012) 75-87.

Cite This Article

Plain Text BibTeX RIS

APA Style

Preecha P. Yupapin, Somboon Nimcome. (2013). Conjugate Mirror by a Panda Ring Circuit. Science Innovation, 1(1), 1-4. https://doi.org/10.11648/j.si.20130101.11

Copy | Download

ACS Style

Preecha P. Yupapin; Somboon Nimcome. Conjugate Mirror by a Panda Ring Circuit. Sci. Innov. 2013, 1(1), 1-4. doi: 10.11648/j.si.20130101.11

Copy | Download

AMA Style

Preecha P. Yupapin, Somboon Nimcome. Conjugate Mirror by a Panda Ring Circuit. Sci Innov. 2013;1(1):1-4. doi: 10.11648/j.si.20130101.11

Copy | Download

@article{10.11648/j.si.20130101.11,
  author = {Preecha P. Yupapin and Somboon Nimcome},
  title = {Conjugate Mirror by a Panda Ring Circuit},
  journal = {Science Innovation},
  volume = {1},
  number = {1},
  pages = {1-4},
  doi = {10.11648/j.si.20130101.11},
  url = {https://doi.org/10.11648/j.si.20130101.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.si.20130101.11},
  abstract = {This paper presents the use of a nonlinear microring resonator device known as a modified add-drop filter for small scale conjugate mirror, which is a basic device for 3D image construction and reconstruction system. It can also be useful for real time 3D image display applications. By using the modified add-drop filter, the 3D image can be constructed and reconstructed within the microring circuit. In this circuit, the object and reference beams can be formed by the reflected signals from through and drop ports of the add-drop filter respectively, where the conjugate mirror concept is obtained by the nonlinear coupling effects via the two nonlinear side rings, in which the four-wave mixing of those signals can be introduced. Finally, the interference of those two beams can be constructed and seen by the whispering gallery mode at the center ring, while the interference signals can be seen by the add port output. The WGMs of waves are simulated and discussed, where the 3D image construction and reconstruction can be seen by using the microring circuit as the conjugate mirror, in which the use of large volume display using a new type of conjugate mirror can be realized.},
 year = {2013}
}

Copy | Download

TY  - JOUR
T1  - Conjugate Mirror by a Panda Ring Circuit
AU  - Preecha P. Yupapin
AU  - Somboon Nimcome
Y1  - 2013/02/20
PY  - 2013
N1  - https://doi.org/10.11648/j.si.20130101.11
DO  - 10.11648/j.si.20130101.11
T2  - Science Innovation
JF  - Science Innovation
JO  - Science Innovation
SP  - 1
EP  - 4
PB  - Science Publishing Group
SN  - 2328-787X
UR  - https://doi.org/10.11648/j.si.20130101.11
AB  - This paper presents the use of a nonlinear microring resonator device known as a modified add-drop filter for small scale conjugate mirror, which is a basic device for 3D image construction and reconstruction system. It can also be useful for real time 3D image display applications. By using the modified add-drop filter, the 3D image can be constructed and reconstructed within the microring circuit. In this circuit, the object and reference beams can be formed by the reflected signals from through and drop ports of the add-drop filter respectively, where the conjugate mirror concept is obtained by the nonlinear coupling effects via the two nonlinear side rings, in which the four-wave mixing of those signals can be introduced. Finally, the interference of those two beams can be constructed and seen by the whispering gallery mode at the center ring, while the interference signals can be seen by the add port output. The WGMs of waves are simulated and discussed, where the 3D image construction and reconstruction can be seen by using the microring circuit as the conjugate mirror, in which the use of large volume display using a new type of conjugate mirror can be realized.
VL  - 1
IS  - 1
ER  -

Copy | Download

Author Information

Preecha P. Yupapin

Advanced Studies Center, Department of Physics, Faculty of Science, King Mongkut’s Institute of Technology Ladkrabang (KMITL), Bangkok 10520, Thailand
Somboon Nimcome

Luborn (Thailand) Co. Ltd., Muang District, Nonthaburi 11000, Thailand

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Preecha P. Yupapin, Somboon Nimcome. (2013). Conjugate Mirror by a Panda Ring Circuit. Science Innovation, 1(1), 1-4. https://doi.org/10.11648/j.si.20130101.11

Copy | Download

ACS Style

Preecha P. Yupapin; Somboon Nimcome. Conjugate Mirror by a Panda Ring Circuit. Sci. Innov. 2013, 1(1), 1-4. doi: 10.11648/j.si.20130101.11

Copy | Download

AMA Style

Preecha P. Yupapin, Somboon Nimcome. Conjugate Mirror by a Panda Ring Circuit. Sci Innov. 2013;1(1):1-4. doi: 10.11648/j.si.20130101.11

Copy | Download

@article{10.11648/j.si.20130101.11,
  author = {Preecha P. Yupapin and Somboon Nimcome},
  title = {Conjugate Mirror by a Panda Ring Circuit},
  journal = {Science Innovation},
  volume = {1},
  number = {1},
  pages = {1-4},
  doi = {10.11648/j.si.20130101.11},
  url = {https://doi.org/10.11648/j.si.20130101.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.si.20130101.11},
  abstract = {This paper presents the use of a nonlinear microring resonator device known as a modified add-drop filter for small scale conjugate mirror, which is a basic device for 3D image construction and reconstruction system. It can also be useful for real time 3D image display applications. By using the modified add-drop filter, the 3D image can be constructed and reconstructed within the microring circuit. In this circuit, the object and reference beams can be formed by the reflected signals from through and drop ports of the add-drop filter respectively, where the conjugate mirror concept is obtained by the nonlinear coupling effects via the two nonlinear side rings, in which the four-wave mixing of those signals can be introduced. Finally, the interference of those two beams can be constructed and seen by the whispering gallery mode at the center ring, while the interference signals can be seen by the add port output. The WGMs of waves are simulated and discussed, where the 3D image construction and reconstruction can be seen by using the microring circuit as the conjugate mirror, in which the use of large volume display using a new type of conjugate mirror can be realized.},
 year = {2013}
}

Copy | Download

TY  - JOUR
T1  - Conjugate Mirror by a Panda Ring Circuit
AU  - Preecha P. Yupapin
AU  - Somboon Nimcome
Y1  - 2013/02/20
PY  - 2013
N1  - https://doi.org/10.11648/j.si.20130101.11
DO  - 10.11648/j.si.20130101.11
T2  - Science Innovation
JF  - Science Innovation
JO  - Science Innovation
SP  - 1
EP  - 4
PB  - Science Publishing Group
SN  - 2328-787X
UR  - https://doi.org/10.11648/j.si.20130101.11
AB  - This paper presents the use of a nonlinear microring resonator device known as a modified add-drop filter for small scale conjugate mirror, which is a basic device for 3D image construction and reconstruction system. It can also be useful for real time 3D image display applications. By using the modified add-drop filter, the 3D image can be constructed and reconstructed within the microring circuit. In this circuit, the object and reference beams can be formed by the reflected signals from through and drop ports of the add-drop filter respectively, where the conjugate mirror concept is obtained by the nonlinear coupling effects via the two nonlinear side rings, in which the four-wave mixing of those signals can be introduced. Finally, the interference of those two beams can be constructed and seen by the whispering gallery mode at the center ring, while the interference signals can be seen by the add port output. The WGMs of waves are simulated and discussed, where the 3D image construction and reconstruction can be seen by using the microring circuit as the conjugate mirror, in which the use of large volume display using a new type of conjugate mirror can be realized.
VL  - 1
IS  - 1
ER  -

Copy | Download