Coal samples from Morupule colliery in Botswana were characterized by bomb calorimetry, thermal-gravimetric analysis, atomic absorption spectrometry and flame photometry. The average heat of combustion of the coal was found to be 27.3 kJ g-1; with a substantial amount of ashes left behind. Thermo-gravimetric analysis showed peaks at 59.40 oC corresponding to loss of surface water, an exothermic peak at 448.54 0C associated with primary devolatilization in which compounds containing carbon, hydrogen and oxygen are released and finally a second exothermic peak at 682.58 0C associated with the secondary degasification in which methane and hydrogen are released. 70.4% of the coal was left after heating to 1000 0C indicating that in its present form, Morupule coal is of low quality but releases plenty of heat on combustion. The determination of the percentage weights of Calcium, Chromium, Copper, Lead, Iron using Atomic Absorption Spectrometry (AAS) and that of Potassium and Sodium using flame photometry showed that Iron (21.0956%) is the dominant inorganic element. The percentage weights of the other elements varied between zero and 7.4301%.
Published in | International Journal of Materials Science and Applications (Volume 3, Issue 6) |
DOI | 10.11648/j.ijmsa.20140306.18 |
Page(s) | 325-330 |
Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
Copyright |
Copyright © The Author(s), 2014. Published by Science Publishing Group |
Coal Characterization, Morupule Coal, Coal Chemical Analysis
[1] | Berger, A.I. and Whitehead,: Conference on Origin of Constituents of Coal Fuel 30, , 247-259 (1951); Corbett, The Radiation dose from Coal Burning: A review of pathways and data, Radiation protection domestry,4 (1): 15-19. http://www.dpcd.vic.gov.au/__data/assets/pdf_file/0017/45332/COAL-Mine-Sites-238-288-Online |
[2] | Van Krevelen D.W., COAL: Topology-Chemistry-Physics-constitution, Elsevier scientific publishing company, Oxford (1981). |
[3] | Boyer, A.F., Association of coal technologies industries 70th congress (1953) 241 |
[4] | Berkowitz N. Fuel, 36, 355-373 (1957), |
[5] | Pampuch R. and Roga B. prace glwonego industry seminar 183 (1956). Nadkarni |
[6] | Thomas, M.G., Catalyst characterization in coal liquefaction, annual report, Sandia National Laboratories Report. 1984 |
[7] | Alcaniz–Monge J., Carzola-Amoros D., and Linares-Solano A. “Characterization of coal pitches by thermal analysis, Infrared spectroscopy” Fuel 80 41 – 48 (2001) |
[8] | Shaoqing Wang, Yuegang Tang, Harald H. Schobert, Gareth D. Mitchell, Fengrong Liao, and Zengzhi Liu ‘A thermal behaviour study of Chinese coals with high hydrogen content’ International Journal of Coal Geology 81 37 – 44. (2010). |
[9] | Prasassarakich, P. and Pecharanond, P. "Kinetics of Coal Desulphurization in Aqueous Cupric Sulphate" Fuel, Vol.71, No.8, 929-933. (1991). |
[10] | Golightly D. W. and Simon F. O: Methods For and Inorganic Analysis of Coal U. S. Geological Survey Bulletin 1823 |
[11] | Hsing Cheng His, Chiaoguo Chen, Massoud Rastam –Abadi, Mark J. Rood, Carl F. Richardson, Todd R. Carey, and Ramsay Chang ‘Preparation and evaluation of coal derived activated carbons for removal of mercury vapour from simulated coal combustion fuel gases’ Energy and Fuel 12 1061 – 1070 (1998). and solvent fractionation’ . Fuel 80 41-48. |
[12] | Baogang Wang Xiaobo Wang Wenjing Lou Jingcheng Hao ‘The thermal conductivity and rheological properties of graphite/oil nano fluids’ Colloids and Surfaces A: Physicochemical and Engineering Aspects 414 125-131, (2012). |
[13] | Centeno T A, Stoeckli F The assessment of surface area in porous carbons by two model independent techniques the DR equation and DFT Carbon 48 2478- 2486 (2010) |
[14] | Canan Akbil, Ahmet Karagunduz, Avni Cakici, and Bulent Keskinler ‘Removal of surfactants by powdered activated carbon’ Water Research 38 2117 – 2124. (2004). |
[15] | Youmi Jeong, T C Mike Chung (2010) The synthesis and characterization of super activated carbon containing substitutable boron (BCx) and its applications in hydrogen storage. Carbon 48 2526-2537 (1980) |
APA Style
Misael Silas Nadiye-Tabbiruka, Wilfred Ddamba, Kifilwe Tsheko, Zakarea Kenewang, Estella Judith Salamula. (2014). Thermal-Gravimetric, Calorimetric and Chemical Analytical Characterisation of Coal. International Journal of Materials Science and Applications, 3(6), 325-330. https://doi.org/10.11648/j.ijmsa.20140306.18
ACS Style
Misael Silas Nadiye-Tabbiruka; Wilfred Ddamba; Kifilwe Tsheko; Zakarea Kenewang; Estella Judith Salamula. Thermal-Gravimetric, Calorimetric and Chemical Analytical Characterisation of Coal. Int. J. Mater. Sci. Appl. 2014, 3(6), 325-330. doi: 10.11648/j.ijmsa.20140306.18
AMA Style
Misael Silas Nadiye-Tabbiruka, Wilfred Ddamba, Kifilwe Tsheko, Zakarea Kenewang, Estella Judith Salamula. Thermal-Gravimetric, Calorimetric and Chemical Analytical Characterisation of Coal. Int J Mater Sci Appl. 2014;3(6):325-330. doi: 10.11648/j.ijmsa.20140306.18
@article{10.11648/j.ijmsa.20140306.18, author = {Misael Silas Nadiye-Tabbiruka and Wilfred Ddamba and Kifilwe Tsheko and Zakarea Kenewang and Estella Judith Salamula}, title = {Thermal-Gravimetric, Calorimetric and Chemical Analytical Characterisation of Coal}, journal = {International Journal of Materials Science and Applications}, volume = {3}, number = {6}, pages = {325-330}, doi = {10.11648/j.ijmsa.20140306.18}, url = {https://doi.org/10.11648/j.ijmsa.20140306.18}, eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmsa.20140306.18}, abstract = {Coal samples from Morupule colliery in Botswana were characterized by bomb calorimetry, thermal-gravimetric analysis, atomic absorption spectrometry and flame photometry. The average heat of combustion of the coal was found to be 27.3 kJ g-1; with a substantial amount of ashes left behind. Thermo-gravimetric analysis showed peaks at 59.40 oC corresponding to loss of surface water, an exothermic peak at 448.54 0C associated with primary devolatilization in which compounds containing carbon, hydrogen and oxygen are released and finally a second exothermic peak at 682.58 0C associated with the secondary degasification in which methane and hydrogen are released. 70.4% of the coal was left after heating to 1000 0C indicating that in its present form, Morupule coal is of low quality but releases plenty of heat on combustion. The determination of the percentage weights of Calcium, Chromium, Copper, Lead, Iron using Atomic Absorption Spectrometry (AAS) and that of Potassium and Sodium using flame photometry showed that Iron (21.0956%) is the dominant inorganic element. The percentage weights of the other elements varied between zero and 7.4301%.}, year = {2014} }
TY - JOUR T1 - Thermal-Gravimetric, Calorimetric and Chemical Analytical Characterisation of Coal AU - Misael Silas Nadiye-Tabbiruka AU - Wilfred Ddamba AU - Kifilwe Tsheko AU - Zakarea Kenewang AU - Estella Judith Salamula Y1 - 2014/10/20 PY - 2014 N1 - https://doi.org/10.11648/j.ijmsa.20140306.18 DO - 10.11648/j.ijmsa.20140306.18 T2 - International Journal of Materials Science and Applications JF - International Journal of Materials Science and Applications JO - International Journal of Materials Science and Applications SP - 325 EP - 330 PB - Science Publishing Group SN - 2327-2643 UR - https://doi.org/10.11648/j.ijmsa.20140306.18 AB - Coal samples from Morupule colliery in Botswana were characterized by bomb calorimetry, thermal-gravimetric analysis, atomic absorption spectrometry and flame photometry. The average heat of combustion of the coal was found to be 27.3 kJ g-1; with a substantial amount of ashes left behind. Thermo-gravimetric analysis showed peaks at 59.40 oC corresponding to loss of surface water, an exothermic peak at 448.54 0C associated with primary devolatilization in which compounds containing carbon, hydrogen and oxygen are released and finally a second exothermic peak at 682.58 0C associated with the secondary degasification in which methane and hydrogen are released. 70.4% of the coal was left after heating to 1000 0C indicating that in its present form, Morupule coal is of low quality but releases plenty of heat on combustion. The determination of the percentage weights of Calcium, Chromium, Copper, Lead, Iron using Atomic Absorption Spectrometry (AAS) and that of Potassium and Sodium using flame photometry showed that Iron (21.0956%) is the dominant inorganic element. The percentage weights of the other elements varied between zero and 7.4301%. VL - 3 IS - 6 ER -