In this paper, moiré interferometry is combined with hole-drilling method to measure the residual stress of an interference fit specimen. And, finite element method is used to calibrate the coefficient of hole-drilling method. The experimental results are consistent with theoretical results, which manifests that moiré interferometry combined with hole-drilling method are reliable and effective for residual stress measurement.
| Published in |
Optics (Volume 4, Issue 3-1)
This article belongs to the Special Issue Optical Techniques for Deformation, Structure and Shape Evaluation |
| DOI | 10.11648/j.optics.s.2015040301.11 |
| Page(s) | 1-4 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2015. Published by Science Publishing Group |
Moiré Interferometry, Hole-Drilling Method, Interference Fit, Residual Stress
| [1] | A. S. Franchim, V.S. de Camposa, D. N. Travessa, and C.D. Moura Neto, "Analytical modelling for residual stresses produced by shot peening". MATER DESIGN, 2009. 30(5): p. 1556-1560 |
| [2] | S.M.H Gangaraj, M. Guagliano, and G.H. Farrahi, "An approach to relate shot peening finite element simulation to the actual coverage". SURF COAT TECH, 2014. 243: p. 39-45. |
| [3] | T.Hong, J.Y. Ooi, and B. Shaw, "A numerical simulation to relate the shot peening parameters to the induced residual stresses". ENG FAIL ANAL, 2008. 15(8): p. 1097-1110. |
| [4] | P.J. Withers and H. Bhadeshia, "Overview - Residual stress part 1 - Measurement techniques". MATER SCI TECH-LOND, 2001. 17(4): p. 355-365. |
| [5] | B. Zuccarello and G. Di Franco, "Numerical-experimental Method for the Analysis of Residual Stresses in Cold-expanded Holes". EXP MECH, 2013. 53(4): p. 673-686. |
| [6] | M. Frija, T. Hassine, R. Fathallah, C. Bouraoui, and A. Dogui,"Finite element modelling of shot peening process: Prediction of the compressive residual stresses, the plastic deformations and the surface integrity". MAT SCI ENG A-STRUCT, 2006. 426(1-2): p. 173-180. |
| [7] | N.S. Rossini, M. Dassisti, K.Y. Benyounis, and A.G. Olabi, "Methods of measuring residual stresses in components". MATER DESIGN, 2012. 35: p. 572-588. |
| [8] | P.J. Withers, "Residual stress and its role in failure". REP PROG PHYS, 2007. 70(12): p. 2211-2264 |
| [9] | H. Schmidt and J. Hattel, "A local model for the thermomechanical conditions in friction stir welding". MODEL SIMUL MATER SC, 2005. 13(1): p. 77-93. |
| [10] | H.M. Xie, B. Li, R. Geer, B. Xu, and J. Castracane, "Focused ion beam Moire method". OPT LASER ENG, 2003. 40(3): p. 163-177. |
| [11] | T. Kim, H. Lee, M. Kim, and S. Jung," A 3D FE model for evaluation of peening residual stress under angled multi-shot impacts". SURF COAT TECH, 2012. 206(19-20): p. 3981-3988 |
| [12] | F. Yang, Z. Chen, and S.A. Meguid, "3D FE modeling of oblique shot peening using a new periodic cell". INT J MECH MATER DES, 2014. 10(2): p. 133-144 |
APA Style
Baoge Zhang, Jianguo Zhu. (2015). Residual Stress Measurement of an Interference Fit Specimen Based on Moiré Interferometry and Hole-Drilling Method. Optics, 4(3-1), 1-4. https://doi.org/10.11648/j.optics.s.2015040301.11
ACS Style
Baoge Zhang; Jianguo Zhu. Residual Stress Measurement of an Interference Fit Specimen Based on Moiré Interferometry and Hole-Drilling Method. Optics. 2015, 4(3-1), 1-4. doi: 10.11648/j.optics.s.2015040301.11
AMA Style
Baoge Zhang, Jianguo Zhu. Residual Stress Measurement of an Interference Fit Specimen Based on Moiré Interferometry and Hole-Drilling Method. Optics. 2015;4(3-1):1-4. doi: 10.11648/j.optics.s.2015040301.11
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.optics.s.2015040301.11,
author = {Baoge Zhang and Jianguo Zhu},
title = {Residual Stress Measurement of an Interference Fit Specimen Based on Moiré Interferometry and Hole-Drilling Method},
journal = {Optics},
volume = {4},
number = {3-1},
pages = {1-4},
doi = {10.11648/j.optics.s.2015040301.11},
url = {https://doi.org/10.11648/j.optics.s.2015040301.11},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.optics.s.2015040301.11},
abstract = {In this paper, moiré interferometry is combined with hole-drilling method to measure the residual stress of an interference fit specimen. And, finite element method is used to calibrate the coefficient of hole-drilling method. The experimental results are consistent with theoretical results, which manifests that moiré interferometry combined with hole-drilling method are reliable and effective for residual stress measurement.},
year = {2015}
}
TY - JOUR T1 - Residual Stress Measurement of an Interference Fit Specimen Based on Moiré Interferometry and Hole-Drilling Method AU - Baoge Zhang AU - Jianguo Zhu Y1 - 2015/05/12 PY - 2015 N1 - https://doi.org/10.11648/j.optics.s.2015040301.11 DO - 10.11648/j.optics.s.2015040301.11 T2 - Optics JF - Optics JO - Optics SP - 1 EP - 4 PB - Science Publishing Group SN - 2328-7810 UR - https://doi.org/10.11648/j.optics.s.2015040301.11 AB - In this paper, moiré interferometry is combined with hole-drilling method to measure the residual stress of an interference fit specimen. And, finite element method is used to calibrate the coefficient of hole-drilling method. The experimental results are consistent with theoretical results, which manifests that moiré interferometry combined with hole-drilling method are reliable and effective for residual stress measurement. VL - 4 IS - 3-1 ER -
Email: