Improvement of the Properties of Aluminium Alloys

Korostelev V. F.; Bolshakov A. E.

doi:doi:10.11648/j.am.20140305.15

| Peer-Reviewed

Improvement of the Properties of Aluminium Alloys

Korostelev V. F., Bolshakov A. E.

Published in Advances in Materials (Volume 3, Issue 5)

Received: 22 August 2014 Accepted: 24 November 2014 Published: 27 November 2014

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

The article describes the improvement of the properties of aluminium alloys under pressure application of up to 400 MPa to a liquid or crystallizing metal. A cybernetic model has been developed. Three phases of the alloy compressibility under pressure were investigated. The results of microstructure studies are indicated, the focus has been made on the non-uniform composition within the limits of dendritic cells. Pressure influence on the formation of crystallization centers and their growth was demonstrated. The relationship between hardness and the content of separate alloy components and of the applied pressure was illustrated.

Published in	Advances in Materials (Volume 3, Issue 5)
DOI	10.11648/j.am.20140305.15
Page(s)	58-62
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2014. Published by Science Publishing Group

Keywords

Crystallization, Aluminium Alloys, Improvement of Properties, Pressure Application, Changes of the State of Alloys, Atomic Interactions

References

[1]	Korostelev V.F. Theory, technology and automation of casting processes with pressure application. Moscow: New technologies, 2004. 224 p. (rus)
[2]	Kachak V.V., Korostelev V.F., Khromova L.P. Nanotechnologies and alloys hardening. Moscow: New technologies, 2011. 240 p. (rus)
[3]	Korostelev V.F., Bolshakov A.E. Process control of steel production. European Applied Sciences is an international. No.2. 2013(January) P.195-197. ISSN 2195-2183. (OKT Publishing. Schwieberdingersten 5970435. Stuttgart, Germany).
[4]	Korostelev V.F. The development of the neural-network model of the alloy crystallization process under pressure. Journal paper / Korostelev V.F., Bolshakov A.E. // Mechatronics, automation, management. No.10, 2011. P.50-55. (rus)
[5]	Herlach D.M., Galenko P.K., Holland-Moritz D. Metastable solids from undercooled melts. Amsterdam: Elsevier, 2007. P.423.
[6]	F. Musharavati, A.S.M. Hamouda, Application of artificial neural networks for modelling correlations in age hardenable aluminium alloys, Journal of Achievements in Materials and Manufacturing Engineering 41/1-2 (2010) 140-146.
[7]	Hattel J. Fundamentals of Numerical Modelling of Casting Processes. Denmark: Polytechnisk Forlag, Kgs. Lynsby, 2005. P. 540.

Cite This Article

Plain Text BibTeX RIS

APA Style

Korostelev V. F., Bolshakov A. E. (2014). Improvement of the Properties of Aluminium Alloys. Advances in Materials, 3(5), 58-62. https://doi.org/10.11648/j.am.20140305.15

Copy | Download

ACS Style

Korostelev V. F.; Bolshakov A. E. Improvement of the Properties of Aluminium Alloys. Adv. Mater. 2014, 3(5), 58-62. doi: 10.11648/j.am.20140305.15

Copy | Download

AMA Style

Korostelev V. F., Bolshakov A. E. Improvement of the Properties of Aluminium Alloys. Adv Mater. 2014;3(5):58-62. doi: 10.11648/j.am.20140305.15

Copy | Download

@article{10.11648/j.am.20140305.15,
  author = {Korostelev V. F. and Bolshakov A. E.},
  title = {Improvement of the Properties of Aluminium Alloys},
  journal = {Advances in Materials},
  volume = {3},
  number = {5},
  pages = {58-62},
  doi = {10.11648/j.am.20140305.15},
  url = {https://doi.org/10.11648/j.am.20140305.15},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.am.20140305.15},
  abstract = {The article describes the improvement of the properties of aluminium alloys under pressure application of up to 400 MPa to a liquid or crystallizing metal. A cybernetic model has been developed. Three phases of the alloy compressibility under pressure were investigated. The results of microstructure studies are indicated, the focus has been made on the non-uniform composition within the limits of dendritic cells. Pressure influence on the formation of crystallization centers and their growth was demonstrated. The relationship between hardness and the content of separate alloy components and of the applied pressure was illustrated.},
 year = {2014}
}

Copy | Download

TY  - JOUR
T1  - Improvement of the Properties of Aluminium Alloys
AU  - Korostelev V. F.
AU  - Bolshakov A. E.
Y1  - 2014/11/27
PY  - 2014
N1  - https://doi.org/10.11648/j.am.20140305.15
DO  - 10.11648/j.am.20140305.15
T2  - Advances in Materials
JF  - Advances in Materials
JO  - Advances in Materials
SP  - 58
EP  - 62
PB  - Science Publishing Group
SN  - 2327-252X
UR  - https://doi.org/10.11648/j.am.20140305.15
AB  - The article describes the improvement of the properties of aluminium alloys under pressure application of up to 400 MPa to a liquid or crystallizing metal. A cybernetic model has been developed. Three phases of the alloy compressibility under pressure were investigated. The results of microstructure studies are indicated, the focus has been made on the non-uniform composition within the limits of dendritic cells. Pressure influence on the formation of crystallization centers and their growth was demonstrated. The relationship between hardness and the content of separate alloy components and of the applied pressure was illustrated.
VL  - 3
IS  - 5
ER  -

Copy | Download

Author Information

Korostelev V. F.

Dept. of Process Automation, Vladimir State University, Vladimir, Russia
Bolshakov A. E.

Dept. of Process Automation, Vladimir State University, Vladimir, Russia

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Korostelev V. F., Bolshakov A. E. (2014). Improvement of the Properties of Aluminium Alloys. Advances in Materials, 3(5), 58-62. https://doi.org/10.11648/j.am.20140305.15

Copy | Download

ACS Style

Korostelev V. F.; Bolshakov A. E. Improvement of the Properties of Aluminium Alloys. Adv. Mater. 2014, 3(5), 58-62. doi: 10.11648/j.am.20140305.15

Copy | Download

AMA Style

Korostelev V. F., Bolshakov A. E. Improvement of the Properties of Aluminium Alloys. Adv Mater. 2014;3(5):58-62. doi: 10.11648/j.am.20140305.15

Copy | Download

@article{10.11648/j.am.20140305.15,
  author = {Korostelev V. F. and Bolshakov A. E.},
  title = {Improvement of the Properties of Aluminium Alloys},
  journal = {Advances in Materials},
  volume = {3},
  number = {5},
  pages = {58-62},
  doi = {10.11648/j.am.20140305.15},
  url = {https://doi.org/10.11648/j.am.20140305.15},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.am.20140305.15},
  abstract = {The article describes the improvement of the properties of aluminium alloys under pressure application of up to 400 MPa to a liquid or crystallizing metal. A cybernetic model has been developed. Three phases of the alloy compressibility under pressure were investigated. The results of microstructure studies are indicated, the focus has been made on the non-uniform composition within the limits of dendritic cells. Pressure influence on the formation of crystallization centers and their growth was demonstrated. The relationship between hardness and the content of separate alloy components and of the applied pressure was illustrated.},
 year = {2014}
}

Copy | Download

TY  - JOUR
T1  - Improvement of the Properties of Aluminium Alloys
AU  - Korostelev V. F.
AU  - Bolshakov A. E.
Y1  - 2014/11/27
PY  - 2014
N1  - https://doi.org/10.11648/j.am.20140305.15
DO  - 10.11648/j.am.20140305.15
T2  - Advances in Materials
JF  - Advances in Materials
JO  - Advances in Materials
SP  - 58
EP  - 62
PB  - Science Publishing Group
SN  - 2327-252X
UR  - https://doi.org/10.11648/j.am.20140305.15
AB  - The article describes the improvement of the properties of aluminium alloys under pressure application of up to 400 MPa to a liquid or crystallizing metal. A cybernetic model has been developed. Three phases of the alloy compressibility under pressure were investigated. The results of microstructure studies are indicated, the focus has been made on the non-uniform composition within the limits of dendritic cells. Pressure influence on the formation of crystallization centers and their growth was demonstrated. The relationship between hardness and the content of separate alloy components and of the applied pressure was illustrated.
VL  - 3
IS  - 5
ER  -

Copy | Download