Study of Microstructure, Microhardness and Phases of Precipitation during Ageing of Cu-Sn and Al-Ag Alloys

M. Fatmi; M. Fatmi; T. Chihi; M. A. Ghebouli; B. Ghebouli; A. Derafa; F. Sahnoune; H. Belhouchet; A. Gamoura

doi:doi:10.11648/j.ajma.20130101.11

| Peer-Reviewed

Study of Microstructure, Microhardness and Phases of Precipitation during Ageing of Cu-Sn and Al-Ag Alloys

M. Fatmi, M. Fatmi, T. Chihi, M. A. Ghebouli, B. Ghebouli, A. Derafa, F. Sahnoune, H. Belhouchet, A. Gamoura

Published in American Journal of Mechanics and Applications (Volume 1, Issue 1)

Received: 9 April 2013 Published: 2 May 2013

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Ageing study of supersaturated solid solutions Cu-13 wt. % Sn and Al-20 wt. % Ag has shown that the two types of precipitation (continuous and discontinuous) would occur for various temperatures and plastic deformation rates (thickness reduction by cold rolling following rapid quenching in iced water). The precipitated phases take place generally on the grain boundaries (discontinuous precipitation DP) and inside the grains (continuous precipitation CP). A detailed study of phases' development conditions and the growth controlling mechanisms has been carried out, for several ageing temperatures with and without plastic deformation of the supersaturated solid solution using various experimental techniques (optical microscopy, X-ray diffraction and microhardness measurements).

Published in	American Journal of Mechanics and Applications (Volume 1, Issue 1)
DOI	10.11648/j.ajma.20130101.11
Page(s)	1-4
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2013. Published by Science Publishing Group

Keywords

Discontinuous Precipitation, Microstructure, Cu-Sn, Al-Ag

References

[1]	N. Agreew, G. Sachs, Z. Phys., 66 (1930), 293.
[2]	D. Hamana Z. Boumerzoug, N.Saheb, Phil. Mag. Letters, 6 (1995), 369.
[3]	M. Fatmi, B. Boumerzoug, Physica B,405 (2010), 4111.
[4]	D. Hamana, A. Azizi, Mater. Sci. Eng. A, 476 (2008) 357
[5]	D. Hamana, Z. Boumerzoug, Z. Metallkd, 7 (1994), 479.
[6]	Z. Boumerzoug, L. Boudhib, A. Chala, J. Mater. Sci. 40 (2005), 3199.
[7]	Z. Boumerzoug, M. Fatmi, Mater. Caract., 60 (2009), 768.
[8]	P. G. Shewmon, "Transformations in metals", Materials Science and Engineering Series, (1969), 274.
[9]	D. Hamana, N. Tabet , A. F. Sirenko, Revue de Métallurgie, 2 (1985), 97.
[10]	A. I. Aaronson, J. B. Clark, Acta Met., 16 (1968), 845. Rodionova, A.K.Shikov, A.D. Nikulin, A.Y. Vorobyeva
[11]	H. Tsubakino, Metallography, 17 (1984), 371.
[12]	S. V. Sudareva T. P. Krinitsina, Y. P. Romanov, L. A. Rodionova, A.K.Shikov, A.D. Nikulin, A.Y. Vorobyeva, Phys. Met. Metall, 71(3) (1991), 125.
[13]	B. Massalski, "Binary Alloys Phase Diagrams", Ed. ASM, (1990), 1482.
[14]	F. Abd el-salam, M.A. Mahmoud, A.M. Abd el-khalek, R.H. Nada, Physica B, 324 (2002), 110.
[15]	J. M. Howe, H.I. Aaronson, R. Grosky, Acta Metall., 33 (1985), 639.
[16]	K.K. Sagoe-crentsil, L.C. Brown, Metall. Trans. A, 63 (1991), 477.
[17]	A. Sakakibara, M. Yamada, T. Kanadani, Z. Metallked, 82 (1991), 769.
[18]	F. Abd el-salam, A.M. Abd el-khalek, R.H. Nada, Fizika A, 10 (2) (2001), 73.
[19]	D. Hamana, Z. Boumerzoug, M. Fatmi, S. Chekroud, Mater. Chem. And Phys., 53 (1998), 208.

Cite This Article

Plain Text BibTeX RIS

APA Style

M. Fatmi, M. Fatmi, T. Chihi, M. A. Ghebouli, B. Ghebouli, et al. (2013). Study of Microstructure, Microhardness and Phases of Precipitation during Ageing of Cu-Sn and Al-Ag Alloys. American Journal of Mechanics and Applications, 1(1), 1-4. https://doi.org/10.11648/j.ajma.20130101.11

Copy | Download

ACS Style

M. Fatmi; M. Fatmi; T. Chihi; M. A. Ghebouli; B. Ghebouli, et al. Study of Microstructure, Microhardness and Phases of Precipitation during Ageing of Cu-Sn and Al-Ag Alloys. Am. J. Mech. Appl. 2013, 1(1), 1-4. doi: 10.11648/j.ajma.20130101.11

Copy | Download

AMA Style

M. Fatmi, M. Fatmi, T. Chihi, M. A. Ghebouli, B. Ghebouli, et al. Study of Microstructure, Microhardness and Phases of Precipitation during Ageing of Cu-Sn and Al-Ag Alloys. Am J Mech Appl. 2013;1(1):1-4. doi: 10.11648/j.ajma.20130101.11

Copy | Download

@article{10.11648/j.ajma.20130101.11,
  author = {M. Fatmi and M. Fatmi and T. Chihi and M. A. Ghebouli and B. Ghebouli and A. Derafa and F. Sahnoune and H. Belhouchet and A. Gamoura},
  title = {Study of Microstructure, Microhardness and Phases of Precipitation during Ageing of Cu-Sn and Al-Ag Alloys},
  journal = {American Journal of Mechanics and Applications},
  volume = {1},
  number = {1},
  pages = {1-4},
  doi = {10.11648/j.ajma.20130101.11},
  url = {https://doi.org/10.11648/j.ajma.20130101.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajma.20130101.11},
  abstract = {Ageing study of supersaturated solid solutions Cu-13 wt. % Sn and Al-20 wt. % Ag has shown that the two types of precipitation (continuous and discontinuous) would occur for various temperatures and plastic deformation rates (thickness reduction by cold rolling following rapid quenching in iced water). The precipitated phases take place generally on the grain boundaries (discontinuous precipitation DP) and inside the grains (continuous precipitation CP). A detailed study of phases' development conditions and the growth controlling mechanisms has been carried out, for several ageing temperatures with and without plastic deformation of the supersaturated solid solution using various experimental techniques (optical microscopy, X-ray diffraction and microhardness measurements).},
 year = {2013}
}

Copy | Download

TY  - JOUR
T1  - Study of Microstructure, Microhardness and Phases of Precipitation during Ageing of Cu-Sn and Al-Ag Alloys
AU  - M. Fatmi
AU  - M. Fatmi
AU  - T. Chihi
AU  - M. A. Ghebouli
AU  - B. Ghebouli
AU  - A. Derafa
AU  - F. Sahnoune
AU  - H. Belhouchet
AU  - A. Gamoura
Y1  - 2013/05/02
PY  - 2013
N1  - https://doi.org/10.11648/j.ajma.20130101.11
DO  - 10.11648/j.ajma.20130101.11
T2  - American Journal of Mechanics and Applications
JF  - American Journal of Mechanics and Applications
JO  - American Journal of Mechanics and Applications
SP  - 1
EP  - 4
PB  - Science Publishing Group
SN  - 2376-6131
UR  - https://doi.org/10.11648/j.ajma.20130101.11
AB  - Ageing study of supersaturated solid solutions Cu-13 wt. % Sn and Al-20 wt. % Ag has shown that the two types of precipitation (continuous and discontinuous) would occur for various temperatures and plastic deformation rates (thickness reduction by cold rolling following rapid quenching in iced water). The precipitated phases take place generally on the grain boundaries (discontinuous precipitation DP) and inside the grains (continuous precipitation CP). A detailed study of phases' development conditions and the growth controlling mechanisms has been carried out, for several ageing temperatures with and without plastic deformation of the supersaturated solid solution using various experimental techniques (optical microscopy, X-ray diffraction and microhardness measurements).
VL  - 1
IS  - 1
ER  -

Copy | Download

Author Information

M. Fatmi

Research Unit on Emerging Materials (RUEM), University of Setif 1, 19000, Algeria
M. Fatmi

Research Unit on Emerging Materials (RUEM), University of Setif 1, 19000, Algeria
T. Chihi

Laboratory for Elaboration of New Materials and Characterization (LENMC), University of Setif 1, 19000, Algeria
M. A. Ghebouli

Microelectronic Laboratory (LMSE), University of Bachir Ibrahimi, Bordj-Bou-Arreridj , 34000, Algeria
B. Ghebouli

Laboratory of studies of Surfaces and Interfaces of Solids Materials, University of Setif 1, 19000, Algeria
A. Derafa

Research Unit on Emerging Materials (RUEM), University of Setif 1, 19000, Algeria
F. Sahnoune

Physics department, Faculty of Science, University of M’sila, 28000, Algeria
H. Belhouchet

Physics department, Faculty of Science, University of M’sila, 28000, Algeria
A. Gamoura

Department of Electronics, Faculty of Technology, University of Setif 1, 19000, Algeria

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

M. Fatmi, M. Fatmi, T. Chihi, M. A. Ghebouli, B. Ghebouli, et al. (2013). Study of Microstructure, Microhardness and Phases of Precipitation during Ageing of Cu-Sn and Al-Ag Alloys. American Journal of Mechanics and Applications, 1(1), 1-4. https://doi.org/10.11648/j.ajma.20130101.11

Copy | Download

ACS Style

M. Fatmi; M. Fatmi; T. Chihi; M. A. Ghebouli; B. Ghebouli, et al. Study of Microstructure, Microhardness and Phases of Precipitation during Ageing of Cu-Sn and Al-Ag Alloys. Am. J. Mech. Appl. 2013, 1(1), 1-4. doi: 10.11648/j.ajma.20130101.11

Copy | Download

AMA Style

M. Fatmi, M. Fatmi, T. Chihi, M. A. Ghebouli, B. Ghebouli, et al. Study of Microstructure, Microhardness and Phases of Precipitation during Ageing of Cu-Sn and Al-Ag Alloys. Am J Mech Appl. 2013;1(1):1-4. doi: 10.11648/j.ajma.20130101.11

Copy | Download

@article{10.11648/j.ajma.20130101.11,
  author = {M. Fatmi and M. Fatmi and T. Chihi and M. A. Ghebouli and B. Ghebouli and A. Derafa and F. Sahnoune and H. Belhouchet and A. Gamoura},
  title = {Study of Microstructure, Microhardness and Phases of Precipitation during Ageing of Cu-Sn and Al-Ag Alloys},
  journal = {American Journal of Mechanics and Applications},
  volume = {1},
  number = {1},
  pages = {1-4},
  doi = {10.11648/j.ajma.20130101.11},
  url = {https://doi.org/10.11648/j.ajma.20130101.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajma.20130101.11},
  abstract = {Ageing study of supersaturated solid solutions Cu-13 wt. % Sn and Al-20 wt. % Ag has shown that the two types of precipitation (continuous and discontinuous) would occur for various temperatures and plastic deformation rates (thickness reduction by cold rolling following rapid quenching in iced water). The precipitated phases take place generally on the grain boundaries (discontinuous precipitation DP) and inside the grains (continuous precipitation CP). A detailed study of phases' development conditions and the growth controlling mechanisms has been carried out, for several ageing temperatures with and without plastic deformation of the supersaturated solid solution using various experimental techniques (optical microscopy, X-ray diffraction and microhardness measurements).},
 year = {2013}
}

Copy | Download

TY  - JOUR
T1  - Study of Microstructure, Microhardness and Phases of Precipitation during Ageing of Cu-Sn and Al-Ag Alloys
AU  - M. Fatmi
AU  - M. Fatmi
AU  - T. Chihi
AU  - M. A. Ghebouli
AU  - B. Ghebouli
AU  - A. Derafa
AU  - F. Sahnoune
AU  - H. Belhouchet
AU  - A. Gamoura
Y1  - 2013/05/02
PY  - 2013
N1  - https://doi.org/10.11648/j.ajma.20130101.11
DO  - 10.11648/j.ajma.20130101.11
T2  - American Journal of Mechanics and Applications
JF  - American Journal of Mechanics and Applications
JO  - American Journal of Mechanics and Applications
SP  - 1
EP  - 4
PB  - Science Publishing Group
SN  - 2376-6131
UR  - https://doi.org/10.11648/j.ajma.20130101.11
AB  - Ageing study of supersaturated solid solutions Cu-13 wt. % Sn and Al-20 wt. % Ag has shown that the two types of precipitation (continuous and discontinuous) would occur for various temperatures and plastic deformation rates (thickness reduction by cold rolling following rapid quenching in iced water). The precipitated phases take place generally on the grain boundaries (discontinuous precipitation DP) and inside the grains (continuous precipitation CP). A detailed study of phases' development conditions and the growth controlling mechanisms has been carried out, for several ageing temperatures with and without plastic deformation of the supersaturated solid solution using various experimental techniques (optical microscopy, X-ray diffraction and microhardness measurements).
VL  - 1
IS  - 1
ER  -

Copy | Download